Home Sitemap  Contact

Lifting Clamps

Horizontal Lifting Clamp 
 

 
 
For lifting and transporting single steel plate.
Capacity Range : 2-10 tons.
The working load limit is the maximum load that the clamps are authorized to support when used in pairs with a lift angle 60 deg. In lifting operation, four clamps must always be used. When the steel plate is too long, use an equalizing beam to prevent overloading the clamps.
2 times WLL - Proof load, 4 times WLL - minimum breaking point.
 
Art. No. Working Load Limit (t per pair) Steel Plate Thickness (mm) A
(mm)
B
(mm)
C
(mm)
D
(mm)
Weight
(mm)
OE2T 2 0-20 127 156 56 29 2.12
OE3T 3 0-30 152 190 64 31 3.4
OE4T 5 20-60 220 293 70 54 8.5
OE5T 8 50-100 277 375 86 59 16.2
OE6T 10 60-125 296 421 86 66 20.2

 ------------------------------------------------------------------

 
Vertical Lifting Clamp
 

 

 
For lifting and transporting single steel plate.
Capacity range : 1-16 tons
The vertical steel plate lifting clamp can be used solely or in pairs
Multi plates must not be lifted. Avoid snatch or shock loading Up the locklever to tighten lockspring when it is under loading. Down the locklever to loose lockspring, then unload.
 
Art. No. Working Load Limit t Steel Plate Thickness (mm) A
(mm)
B
(mm)
C
(mm)
D
(mm)
E
(mm)
F
(mm)
G
(mm)
H
(mm)
I
(mm)
Opening
(mm)
Weight
(Kg/Pc)
OE1 1 0-16 59 12 16 45 32 122 73 277.5 155 50 3.7
OE2 2 0-22 61 16 23 55 45 165 90 340 190 55 6.3
OE3 3 5-30 72 16 28 60 55 195 110 374 227 70 10.5
OE4 5 16-50 82 20 33 70 70 250 135 458 275 90 19.3
OE5 8 40-80 100 25 40 80 80 345 175 568 370 130 40
OE6 12 50-90 107 28 45 90 105 430 182 635 380 150 52
OE7 16 60-100 107 41 50 100 115 455 200 650 410 160 55

------------------------------------------------------------------

 
Pipe Lifting Clamps
 

 

 
Capacity Shackle Size Plate Size
Each Pair
1.5 3 16 x 19 16
2.5 5 16 x 19 25
4.0 8 19 x 22 28
5.0 10 19 x 22 32
7.5 15 25 x 28 35
10 20 25 x 28 45
 
 
 
 

All Rights Reserved @ 2009    Powered By : Lexical Systems