Horizontal Lifting Clamp


For lifting and transporting single steel plate.
Capacity Range : 2-10 tons.
The working load limit is the maximum load that the clamps are authorized to support when used in pairs with a lift angle 60 deg. In lifting operation, four clamps must always be used. When the steel plate is too long, use an equalizing beam to prevent overloading the clamps.
2 times WLL – Proof load, 4 times WLL – minimum breaking point.
Art. No. | Working Load Limit (t per pair) | Steel Plate Thickness (mm) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
Weight (mm) |
OE2T | 2 | 0-20 | 127 | 156 | 56 | 29 | 2.12 |
OE3T | 3 | 0-30 | 152 | 190 | 64 | 31 | 3.4 |
OE4T | 5 | 20-60 | 220 | 293 | 70 | 54 | 8.5 |
OE5T | 8 | 50-100 | 277 | 375 | 86 | 59 | 16.2 |
OE6T | 10 | 60-125 | 296 | 421 | 86 | 66 | 20.2 |
Vertical Lifting Clamp


For lifting and transporting single steel plate.
Capacity range : 1-16 tons
The vertical steel plate lifting clamp can be used solely or in pairs
Multi plates must not be lifted. Avoid snatch or shock loading Up the locklever to tighten lockspring when it is under loading. Down the locklever to loose lockspring, then unload.
|
Pipe Lifting Clamps


Capacity | Shackle Size | Plate Size | |
Each | Pair | ||
1.5 | 3 | 16 x 19 | 16 |
2.5 | 5 | 16 x 19 | 25 |
4.0 | 8 | 19 x 22 | 28 |
5.0 | 10 | 19 x 22 | 32 |
7.5 | 15 | 25 x 28 | 35 |
10 | 20 | 25 x 28 | 45 |